Programme
1)
Degree of soil
Type of load
Programme
phases
Duration
(min)
Energy
(kWh)
Water
(l)
2)
Normal soil
Crockery and cutlery
Prewash
Wash 50 °C
Rinses
Dry
120 - 130 0.8 - 0.9 12 - 13
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can
change the programme duration and the consumption values.
2) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal
soil. (This is the standard programme for test institutes).
Information for test institutes
For all the necessary information for test performance. send an email to:
Write down the product number (PNC) that is on the rating plate.
Options
Acoustic signals
The acoustic signals operate when the programme is
completed and when the appliance has a malfunction.
By default, the acoustic signals are on, but it is possible
to deactivate them.
How to deactivate the acoustic signals
1. Press the on/off button to activate the appliance.
2. Make sure that the appliance is in setting mode, re-
fer to ‘Setting and starting a programme’.
3. Press and hold the programme button until the indi-
cator
flashes and the indicator
comes on.
4. Press immediately the programme button.
•
The indicator
comes on with a fixed
light.
•
The indicator
starts to flash.
5.
Wait until the indicator
goes off and the
end indicator comes on (the indicator
continues to flash).
• The acoustic signals are on.
6. Press the programme button. The end indicator
goes off.
• The acoustic signals are off.
7. Deactivate the appliance to confirm the setting.
How to activate again the acoustic signals
1. Refer to ’How to deactivate the acoustic signals’
and follow the procedure from step (1) to step (5).
The end indicator is off.
2. Press the programme button. The end indicator
comes on.
• The acoustic signals are on.
3. Press the on/off button to deactivate the appliance
and to confirm the setting.
Before first use
1. Make sure that the set level of the water softener
agrees with the water hardness in your area. If not,
adjust the water softener. Contact your local water
authority to know the water hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
17
