145
Specifications
Media Specifications
1/18/06 Z4Mplus/Z6Mplus User Guide 13163L-001 Rev. A
Media Specifications
Media Specifications Z4Mplus Z6Mplus
Label length Minimum Tear-off 0.5 in.* 13 mm* 0.5 in. 13 mm
Peel-off 1 in.* 25.4 mm* 1 in. 25.4 mm
Rewind 0.5 in.* 13 mm* 0.5 in. 13 mm
Cutter 1 in.* 25.4 mm* 1.5 in. 38.1 mm
RFID “smart”
labels
Varies for each transponder
type
N/A. RFID is not available
for the Z6Mplus.
Maximum Tear/Cutter/
Peel/Rewind
39 in. 991 mm 39 in. 991 mm
RFID “smart”
labels
Varies for each transponder
type
N/A. RFID is not available
for the Z6Mplus.
Label width Minimum Tear/Cutter/
Peel/Rewind
1 in.* 25.4 mm* 2 in. 51 mm
RFID “smart”
labels
Varies for each transponder
type
N/A. RFID is not available
for the Z6Mplus.
Maximum Tear/Cutter 4.5 in. 114 mm 7.0 in. 178 mm
Peel/Rewind 4.25 in. 108 mm 6.75 in. 171 mm
RFID “smart”
labels
Same as for non-RFID label
removal methods
N/A. RFID is not available
for the Z6Mplus.
Total thickness
(includes liner, if any)
Minimum 0.0023 in. 0.058 mm 0.0023 in. 0.058 mm
Maximum 0.010 in. 0.25 mm 0.010 in. 0.25 mm
Core size 3 in. 76 mm 3 in. 76 mm
Maximum roll diameter 8 in. 203 mm 8 in. 203 mm
Inter-label gap Minimum 0.079 in.* 2 mm* 0.079 in.* 2 mm*
Preferred 0.118 in.* 3 mm* 0.118 in. 3 mm*
Maximum 0.157 in.* 4 mm* 0.157 in.* 4 mm*
RFID “smart”
labels
Varies for each transponder
type
N/A. RFID is not available
for the Z6Mplus.
Ticket/tag notch size (width x length) 0.236 in. ×
0.12 in.
6 mm ×
3 mm
0.236 in. ×
0.12 in.
6 mm ×
3 mm
Hole diameter 0.125 in. 3 mm 0.125 in. 3 mm
Notch or hole position
(Centered from inner
media edge)
Minimum 0.15 in. 3.8 mm 0.15 in. 3.8
Maximum 2.25 in. 57 mm 3.5 in. 90 mm
* Does not apply to RFID “smart” labels.
