Selection of desired programme
Turn the programme selector to the required
programme. The “Start/Pause”
pushbutton
flashes green.
If you turn the programme selector to another
programme while a cycle is in progress, the
appliance will ignore the new selected pro-
gramme. “Err” flashes and the “Start/Pause”
pushbutton flashes red for a few seconds.
Selecting the spin speed
Press the “Spin”
pushbutton to change the
spin speed.
The maximum spin speeds are :
for Cottons : 1300 rpm (ZWT3304), 1200
rpm (ZWT3204), for Synthetics, Wool, Hand-
wash, Mix 20° : 900 rpm, for Delicates : 700
rpm.
At the end of the programme, if you have se-
lected “Rinse hold”
, you then need to se-
lect a “Spin”
or “Drain” programme to
finish the cycle and empty the water.
Selecting options
You must select the different options after se-
lecting the programme and before pressing
the “Start/Pause”
pushbutton (see “Pro-
gramme table”). Press the desired button(s) ;
the corresponding lights come on. If pressed
again, the lights go out. If one of the options is
not compatible with the selected programme,
“Err” flashes on the display and the “Start/
Pause”
pushbutton flashes red.
“Prewash” option
The appliance runs a prewash at 30°C max.
“Quick” option
The washing time will be reduced depending
on the programme selected.
“Economy” option
This option allows you to choose a lower tem-
perature programme which is as effective as a
higher temperature wash programme.
“Easy iron” option
If you select this option, the laundry is washed
and spun delicately to prevent any creasing.
This makes ironing easier.
“Rinse plus” option
The washing machine will add one or more rin-
ses during the cycle. This option is recommen-
ded for people with sensitive skin and in soft
water areas.
“Delay start”
This option allows you to delay the start of a
wash programme by 30 minutes, 60 minutes,
90 minutes, 2 hours to 20 hours. The selected
time appears on the display for a few seconds.
You can change or cancel the delayed start
time at any time before you press the “Start/
Pause”
pushbutton, by pressing the “Delay
start”
pushbutton again ( ’ indicates im-
mediate start).
If you have already pressed the “Start/Pause”
pushbutton and you want to change or
cancel the delayed start, proceed as follows :
• To cancel the delayed start and start the cy-
cle immediately, press “Start/Pause”
and
then “Delay start”
. Press “Start/Pause”
to start the cycle.
• To change the timer delay period, you must
go through the “Stop”
position and re-
programme your cycle.
The lid will be locked during the delayed start
time. If you need to open it, you must first
pause the appliance by pressing the “Start/
Pause”
pushbutton. After closing the lid
again, press the “Start/Pause”
pushbutton.
Start of the programme
Press the “Start/Pause”
pushbutton to start
the cycle ; the corresponding light will come
on green. The
indicator lights up (lid
locked). It is normal for the programme selec-
tor to remain stationary during the cycle. The
remaining time appears on the display. If a de-
layed start has been selected, the countdown
appears on the display.
The drain pump can operate for a short
time when the appliance fills water.
Interrupting a programme
Adding washing during the first 10 mi-
nutes
6
www.zanussi.com
