10
7 Select the spin speed and the
RINSE HOLD option
Press the SPIN SPEED button repeatedly in order
to select the desired spin speed or the RINSE
HOLD option. The relevant light will illuminate.
If you select the RINSE HOLD option, the machine
will stop at the end of the programme with the water
still in the tub.
8 Select the desired options
If your laundry is very dirty, it may be advisable to
select the PREWASH option.
If you want a programme which saves water and
energy by washing normally soiled white clothes
at around 60°C, select the ECO option.
If you want a shortened wash programme for
lightly soiled washing, select the QUICK option.
If you wish the laundry to undergo an extra rinse,
select the SUPER RINSE option.
If you want to wash at night, select the NIGHT
CYCLE option. The washing is left to soak in the
final rinse water.
Press the OPTIONS button so as to cause one or
both of the lights to illuminate.
9 Start the programme
Press the START/PAUSE button. The relevant light
will stop flashing, the DOOR light will illuminate,
and only the light relevant to the phase that is in
progress will remain lit.
10 How to change a programme
during a cycle
Before you make any change, you must pause
the washing machine by pressing the START/
PAUSE button.
It is possible to change any phase before the pro-
gramme carries out.
Changing the type of fabric or temperature is pos-
sible, obviously, only during the washing phase.
When you make a change to the fabric or
temperature, the washing machine will resume the
cycle from the beginning.
If it is necessary to drain the water in order to
change the programme in progress, proceed as
follows:
• pause the machine by pressing the START/
PAUSE button;
• press the SKIP/RESET button repeatedly, until
only the DRAIN light remains lit;
• press the START/PAUSE button again.
You may now select a new programme and press
the START/PAUSE button to start it.
11 How to cancel a programme
during a cycle
To cancel a programme that is being carried out,
• first pause the washing machine by pressing
the START/PAUSE button,
• then press the SKIP/RESET button repeatedly.
