7
3.10.2. Modifying the current programme
Before modifying the options of the current programme,
you must put the washing machine to pause by
pressing on the START/PAUSE pushbutton.
It is possible to change any phase before the
programme carries out.
Changing the type of fabric or temperature is possible,
obviously, only during the washing phase.
After modifying the programme, press the START/
PAUSE pushbutton.
3.10.3. Cancelling the programme
To cancel a programme that is being
carried out :
• pause the washing machine by
pressing the START/PAUSE button,
• press the SKIP/RESET button
repeatedly.
Note : when you switch the machine on, if you must
erase the previously performed programme, it is also
sufficient to press the FABRICS button and select a
new programme.
3.11. End of programme
The washing machine stops automatically. You will
hear a double "click" in the locking device when the
cover opens.
If you choose the rinse hold position*, a zero appears
on the display to inform you that water has to be
drained before you can open the cover.
The DOOR light goes out at once.
Press the ON/OFF button to switch the machine off.
The relevant light goes out. Take out the laundry.
Check whether the drum is completely empty, by
rotating it with your hand.
The purpose of this is to prevent any items of laundry
from remaining accidentally in the drum, where they
might get damaged in a subsequent wash (e.g. by
shrinking) or bleed colour into another load of laundry.
We advise you to close the water supply tap and
disconnect the plug from the socket.
Note : we recommend that you should leave the cover
and the drum open after use to air the washing drum.
* depending on model
