Securing to the adjacent
units
To prevent the dishwasher tilting, it must be secured to
either the worktop or adjacent kitchen cabinet/wall using
the brackets supplied.
Insert the two fixing brackets into the slots provided in
the top front part of the dishwasher as shown in the
figure.
Secure the brackets to the adjacent units with the 3.5 x
16 screws using the upper or the side holes.
The appliance must be secured to the
underside of the underside of the
worktop using the brackets provided.
Failure to do this could cause damage
or injury.
Adjusting the door balance
When the dishwasher door is correctly balanced it will
remain in position when left ajar.
The door balance may need to be adjusted when the
decor panel is fitted.
Turn the screws until the correct balance is reached:
- heavy panel- turn clockwise
- light panel - turn anticlockwise
After the adjustment of the door balance, cover the
screw holes with the two plugs supplied with the
machine.
29
PFI14UK
