28
8. At the end of the washing
programme
The dishwasher will automatically stop and an
intermittent audible signal informs you that the
programme has ended.
In the digital diplay will appear three zeros (000) and all
the indicator lights of the phases and of the programme
will turn off.
The On/Off indicator light remains on until the On/Off
push button is depressed.
Wait a few minutes before opening the dishwasher’s
door; in this way the dishes will be cooler and you will
avoid burning yourself.
Empty the lower basket first and then the upper one; this
will avoid water dripping from the upper basket onto the
dishes in the lower one.
The dishwasher has finished the programme only
when you will hear an audible signal and the phase
indicator lights (included DRYING) are off.
Three zeros must be visible in the digital display.
If you do not wait for the end of the programme it will
not be possible to start a new programme if first you
do not cancel the previous.
(For the formalities how to cancel a programme see
point 9).
9. To cancel a programme
A programme can be cancelled at any time.
In progress:
press for at least 5 seconds the push button of the
programme in progress. After 5 seconds the machine will
return to setting mode and a new programme can be
selected.
The same operation can be done to cancel the
countdown of the delay start.
Before starting a programme, with the door open:
to cancel the selected programme press the On/Off push
button.
Before the end of the 5 seconds after the last
pressure of a push button:
to cancel the selected programme press the On/Off push
button.
Important!
In general it is not advisable to open the door while the
machine is working; if the door is opened however, a
safety device ensures that the machine stops.
Care must be taken if the door is opened during the hot
phase or immediately after a programme has finished, as
steam may escape.
When the washing programme has finished, it is
recommended that the dishwasher is unplugged and the
water tap turned off.