Use of detergent and rinse aid
8
1
2
3
4
5
6
7
Use of detergent
To help the environment, do not use more than
the correct quantity of detergent.
Obey the instructions on packaging of the detergent .
To fill the detergent dispenser:
1.
Press the release button
2
to open the lid
8
.
2.
Put the detergent in the detergent dispenser
1
.
3. If the washing programme has a prewash phase,
put a small quantity of detergent on the inner side
of the appliance door.
4. If you use detergent tablets, put the tablet in the
detergent dispenser
1
.
5. Close the lid until it locks into position.
Use long washing programmes when you use de-
tergent tablets. Detergent tablets do not fully dis-
solve with short washing programmes and can de-
crease the washing results.
Use of rinse aid
Rinse aid makes it possible to dry the dishes with-
out streaks and stains.
Rinse aid is automatically added during the last rinsing
phase.
To fill the rinse aid dispenser:
1.
Press the release button
7
to open the lid
6
.
2.
Fill the rinse aid dispenser
3
with rinse aid. The
mark 'max.' shows the maximum level.
3. Remove the spilled rinse aid with an absorbent
cloth to prevent foam during the washing pro-
gramme.
4. Close the lid until it locks into position.
Fill the rinse aid dispenser when the lens
5
is
transparent.
Adjust the rinse aid dosage
Factory set: position 3.
You can set the rinse aid dosage between position 1
(lowest dosage) and position 4 (highest dosage).
Turn the rinse aid selector
4
to increase or decrease
the dosage.
Using combi detergent tablets
These tablets contain agents as detergent, rinse aid
and dishwasher salt. Some types of tablets can contain
other agents.
When you use tablets, that contain salt and rinse aid,
do not fill the salt container and rinse aid dispenser.
Be sure that these tablets are applicable for the water
hardness in your area (refer to the instructions on the
packaging of the products).
1. Adjust the water hardness to the lowest level. Refer
to 'Setting the water softener'.
2. Set the rinse aid dosage to the lowest position. Re-
fer to 'Use of detergent and rinse aid'.
Using again separately detergent, salt and rinse aid
1. Fill the salt container and the rinse aid dispenser.
2. Adjust the water hardness to the highest level.
3. Start a washing programme without dishes.
4. When the washing programme is completed, adjust
the water softener to the water hardness in your
area.
5. Adjust the quantity of rinse aid.
24
