Programme Position of the
programme
knob
Type of soil Type of load Programme description
D Use this programme to quickly rinse
the dishes. This prevents the remain-
ing food to bond on the dishes and bad
odours to come out from the appliance.
Do not use detergent with this pro-
gramme.
Rinse
1) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
2) This is the standard programme for test institutes. With this programme you have the most efficient use of water and energy
consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for test information.
Consumption values
Programme Programme time (minute) Energy (kWh) Water (litre)
100-110 1,4-1,6 19-21
30 0,9 9
130-140 1,0-1,2 14-16
12 0,1 5
The water pressure and temperature, the varia-
tions of the mains supply and the quantity of
dishes can change the consumption values.
Use of the appliance
1. Be sure that the set level of the water softener
agrees with the water hardness in your area. If
not, adjust the water softener.
2. Fill the salt container with dishwasher salt.
3. Fill the rinse aid dispenser with rinse aid.
4. Load cutlery and dishes into the appliance.
5. Set the correct washing programme for the type of
load and soil.
6. Fill the detergent dispenser with the correct quan-
tity of detergent.
7. Start the washing programme.
Setting the water softener
The water softener removes minerals and salts from
the water supply. These minerals and salts can cause
damage to the appliance.
Adjust the level of the water softener if this does not
agree with the water hardness in your area.
Contact your local water authority to know the water
hardness in your area.
20
