Reset function
Press and hold simultaneously and until the appliance is in programme selection mode.
With this function you can cancel the running programme or the delay start.
User mode
While the appliance is in programme selection mode:
1. Press and hold
and .
• The indicators , and start to flash.
In user mode can, the following settings be changed:
• The level of the water softener according to the water hardness.
• The activation or the deactivation of the acoustic signal indicating the end of programme.
These settings are saved until you change them again.
Adjusting the water softener
While the appliance is in user mode:
1. Press .
• The indicators and go off.
• The indicator
continues to flash.
• The indicator starts to flash. The number of flashes indicates the current setting (e.g. 5 flashes + pause
+ 5 flashes = level 5).
6
