PREPARING FOR FIERY CONTROLLER SETUP 20
Back view of the Integrated Fiery Color Server
Ethernet connection
For Ethernet connections, the Integrated Fiery Color Server supports Unshielded Twisted Pair
(UTP) cabling for these network speeds:
• 10BaseT: Category 3 or higher
• 100BaseTX: Category 5 or higher (4-pair/8-wire, short-length)
• 1000BaseT: Category 5e or higher (4-pair/8-wire, short-length)
TO CONNECT TO THE NETWORK
1 Power off the digital press and Integrated Fiery Color Server.
For information about the proper procedures, see page 71.
2 Connect the scan crossover cable from the Integrated Fiery Color Server to the scan port on
the digital press.
3 Connect the network cable from the network to the appropriate network connector (RJ-45)
on the back of the Integrated Fiery Color Server.
4 Power on the Integrated Fiery Color Server and the digital press.
1 Power connector
2 Power button
3 Scan crossover cable
connector
4 Network connector
5 Digital press connector
6 USB connectors
1
2
3
4
5
6
