2750 op#0_2 R3.doc 10-02
PRINTFOLD
MODEL 2750
&
SYNERGIX FOLD SYSTEM 40
ENGINEERING DOCUMENT FOLDER
OPERATOR’S MANUAL
Table of Contents
Chapter 1 Introduction
Chapter 2 Operating Instructions
Chapter 3 Outline of Folding Mechanism
Chapter 4 System Menu and Key Operator Functions
The interlock system is designed to prevent access to
components capable of causing injury. Do not try to defeat any
interlock by taping or otherwise artificially holding it closed.
Line voltage (115 or 230Vac) is present at exposed points on the
accordion folder base frame (back of the power entry module,
and at fuses on the power supply board). This applies whether
or not the interlock circuit is intact. Access to these danger points
is prevented by a plastic panel at the rear of the accordion folder,
which must not be removed by other than a qualified service
technician.
WARNING
WARNING
