PROBLEM SOLVING TASKS
12-34 XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
Message display is blank
To solve this problem:
Step 1. Ensure the tape drive is receiving power from the main AC source.
Step 2. Ensure that the AC Power switch on the rear of the tape drive is on
(see figure 12-41).
Figure 12-41.18/36 Track AC power switch
Step 3. Turn the DC Power switch OFF(0) and then ON (1). Figure 12-42
shows the switch.
Figure 12-42.DC power switch
Step 4. If the display is still blank, call for service.
AC Power switch
DC
Power
switch
