Product overview
1-6 Installation Planning Guide
Xerox is responsible for the physical installation and service of
the printer and controller hardware and software components.
You have the general responsibility for the site of ensuring that
the correct personnel, supplies, and network hardware and
software are available. Refer to the “Preparing for installation”
chapter for a detailed description of the shared responsibilities of
the customer and of Xerox.
Client workstations and system software
To submit print jobs to the printing system, the customer needs
to provide the proper client hardware as well as operating
system and network software.
Supported hardware and operating systems
The Xerox DocuPrint 100/115/135/155/180 EPS supports the
following types of networked client workstations and operating
systems:
• Sun Workstation running Solaris 2.3 or higher
• PC running MS-DOS 5.0 or higher, using Ethernet with TCP/
IP or Novell NetWare 3.11 or higher, Windows 95/98,
Windows NT 4.0, Windows Millennium, Windows 2000, or
Windows XP
• PC running MS-DOS 5.0 or higher, with one or more of the
following TCP/IP packages:
– PC/TCP Network Software by FTP Software, Inc.
– Pathway Access by Wollongong Group, Inc.
– PC-NFS by Sun Select
• Apple Macintosh running 8.6 through 9.x, or 10.1 or higher in
Classic mode, using AppleTalk through Ethernet
• Any system that supports RFC-1179 lpr/lpd
The printing system software may be compatible with
workstation models and software versions other than those listed
above.
