EN
5
SETTINGS
The following settings can be changed / selected:
Display language / key tones / cycle end alert/ display
contrast / water hardness / 6
th
Sense Live feature / eco
mode (automatic switch-o function after programme
end) / auto dosing on or o (permanently enable or
disable automatic detergent dosing) / calibration (adapt
dosing amount of the Tanks to the recommendations of
your detergent or softener) / Tank2 content (= set Tank2
to detergent or softener) / return to factory settings.
• Press the Settings button.
• Select the setting which you want to change by
pressing the UP or DOWN key. Afterwards press the OK
key.
• Press the UP or DOWN key to set the desired value or
choose from the menu, afterwards conrm by pressing
the OK key.
• To exit the Settings mode, either press UP or DOWN
key until the display indicates that you can exit – then
conrm by pressing the OK key. Or wait for a few
seconds until the Settings mode will be ended
automatically.
• Close the door again and press “Start/Pause” to
proceed with the programme.
10. RESET A RUNNING PROGRAMME, IF
NEEDED
• Press and hold the “On/O” button until the
display indicates that the programme is
cancelled.
The water drains, the programme ends and the door
unlocks.
11. SWITCH OFF THE WASHING MACHINE
AFTER PROGRAMME END
• The display indicates that the cycle has ended,
and the “Door open” indicator lights up – you
can take out your laundry
• Press “On/O” to switch o the washing machine. If
you do not switch it o, the washing machine will
switch o automatically after about a quarter of an
hour after programme end, to save energy.
• Leave the door ajar, so that the inside of the washing
machine can dry.
