4
WASHER DISPOSAL
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed for connecting the water inlet hoses
■ Pliers (that open to
39.5 mm [1
9
/16"])
■ Flashlight (optional)
Tools needed for installation
■ Open end wrenches
1/2" and 9/16"
■ Torx
®†
T-20 Security
screwdriver
■ 1/4" nut driver
■ Level
■ Wood block
■ Ruler or measuring tape
†® TORX is a registered trademark of Acument Intellectual Properties, LLC.
Parts supplied
A. U-shaped hose form
B. Water inlet hoses (2)
C. Inlet hose washers (4)
D. Transit bolt hole plug (4)
E. Beaded tie strap
AB C
D
E
Alternate Parts
Your installation may require additional parts. If you are interested
in purchasing one of the items listed here, contact your
authorized Whirlpool distributor.
If You Have You Will Need to Buy
Laundry tub or
standpipe taller
than 2.4 m (96")
Sump pump system (if not already
available)
Overhead sewer Standard 76 L (20 gal. ), 762 mm (30") tall
d
r
ain tub or utility sink and sump pump
(available from local plumbing suppliers)
Floor drain Siphon break, Part Number 285320;
additional drain hos
e,
Part Number 8318155; and Floor drain
ki
t, Pa
rt Number 280129
Drain hose
too short
1.2 m (4 ft.) drain hose extension kit,
Part Number 285834
