4
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED ashes rapidly 3 times
and beeps will sound. The option will not be enabled.
MULTIZONE
If there are not many dishes to be washed, a half loading may
be used in order to save water, electricity and detergent.
Select the program and then press the MULTIZONE button:
the indicator over the button lights up and the symbol of the
chosen rack will appear on the display.
By default the appliance washes dishes in all racks.
To wash only the specic rack, press this button repeatedly:
shown on the display (only lower rack)
shown on the display (only upper rack)
shown on the display (only cutlery rack)
shown on the display (option is OFF and the appliance will
wash dishes in all racks).
Remember to load the upper or lower rack only, and to
reduce the amount of detergent accordingly.
SANI RINSE
This option can be used to sanitize washed dishes.
It will increase nal rinse temperature and add antibacterial
wash to the selected program.
Select the washing program, press the SANI RINSE button; the
indicator light will light up. To deselect the option, press the
same button again. Ideal to clean crockery and feeding bottles.
The dishwasher door must be kept shut for the entire duration
of the program in order to guarantee reduction of germs. If the
door is opened the indicator lamp starts ashing.
WARNING: the crockery and plates could be
extremely hot at the end of the cycle.
KEYLOCK
A long press (for 3 seconds) of SANI RINSE button, will activate
the KEYLOCK function. The KEYLOCK function will block the
control panel except the ON/OFF button. To deactivate the
KEYLOCK, long press again.
POWER CLEAN®
Thanks to the additional power jets this option provides a
more intensive and powerful wash in the lower rack, in the
specic area. This option is recommended for washing pots
and casseroles. Press this button to activate POWER CLEAN®
(the indicator lights up).
TABLET
This setting allows you to optimize the performance of the
program according to the type of detergent used.
Press the TABLET button (the corresponding indicator and sym-
bol will light up) if you use combined
detergents in tablet form
(rinse aid, salt and detergent in 1 dose).
If you use powder or liquid detergent, this option should
be o.
DELAY
The start of the program may be delayed for a period of time
between 0:30 and 24 hours.
1. Select the program and any desired options. Press the DELAY
button (repeatedly) to delay the start of the program. Adjusta-
ble from 0:30 to 24 hours. With each press of the button, the
delay start increases by: 0:30 if selection below 4 hours, 1:00 if
selection is below 12 hours, 4 hours if selection is above 12
hours. If 24 hours reached, and the button is pressed, the
delayed start is deactivated.
2. Press the START/PAUSE button: the timer will begin counting
down;
3. Once this time has elapsed, the indicator light switches o and
the program begins automatically.
If at the time of the countdown the START/PAUSE button is
pressed again the DELAY option is cancelled and the selected
program starts automatically.
The Delay function cannot be set once a wash cycle has
been started.
WATER TAP CLOSED – Alarm
Flashes when there is no inlet water or water tap is closed.
DRAIN OUT
To stop and cancel the active cycle, the Drain Out function can
be used.
A long press of START/Pause button, will activate the DRAIN OUT
function. The active program will be stopped and the water in
the dishwasher will be drained out.
DOOR OPENING SYSTEM DOS
Door opening system (DOS) is a convection drying system which auto-
matically opens the door during/after drying phase to ensure excep-
tional drying performance every day. Door opens at the temperature
that is safe to your kitchen furniture, thus door will not be opened
when the option of SANI RINSE or TURBO are on.
As additional steam protection, special designed protection foil is ad-
ded together with the dishwasher. To see how to mount protection foil
please refer to (INSTALLATION GUIDE).
DOS functionality could be disabled by the user as follows:
To DISABLE: Switch On the machine, then switch it O. Keep the «P»
button pressed for 5 sec., at the end of 5 sec the dishwasher plays a
long beep. Switch On the machine, the display shows «oOF»
To ENABLE: Switch On the machine, then switch it O. Keep the «P»
button pressed for 5 sec., at the end of 5 sec the dishwasher plays a
long beep. Switch On the machine, the display shows «oOn»
