A- Next selector
Press the "
"button and the
tape will automatically advance
to the next song. There must be
a pause of approx. 5 seconds
between songs for this function
to operate.
B- Previous selector
Press the " "button and the
tape will automatically rewind
to the previous song. There
must be a pause of approx. 5
seconds between the songs for
this function to operate.
C- Pause
If you press the "volume" knob
the tape is stopped, the unit is
silent and "PAUSE" is
displayed. To restart the tape
press the knob again.
D- Scan
Press this button to listen to the
first five seconds of each song.
Press this button or the "TAPE"
button to stop scanning. During
scanning "SCAN" will be
displayed. There must be a gap
(no audio sound) of approx. 5
seconds between songs for this
function to operate.
Cassette deck (cont) pg. 140
A- Cassette eject
If the button is pressed the tape
will stop and the cassette will be
ejected. The radio will be
automatically engaged. The
radio or CD will engage
automatically (depending on
which mode was activated
before the tape was played).
B- To re-enter Radio mode
Push one of the waveband
selector buttons
When the unit re-enters Radio
mode, the cassette will not be
ejected.
C- To re-enter Tape mode
If the Tape function has been
disconnected and the cassette
has not been ejected, the Tape
mode can re-entered by pressing
D- To re-enter CD changer
mode
If the CD changer function has
been disconnected, the CD
changer mode can re-entered by
pressing the "CHGR" button.
