the RDS information on page 168.
By pressing the TP button, RDS stations broadcasting traffic information can be heard. `TP' is displayed
when this function is switched on. If the unit is in tape or CD mode when the radio receives traffic
information, the respective function will be interrupted and the announcement is received at the volume
selected for traffic information.
As soon as the announcement is over, the previous volume will be restored and the tape or CD will start
to play again.
· Traffic information can only be received when TP is displayed.
· If TP is flashing, it means that either no traffic information is being broadcast by the current transmitter
or the signal is too weak.
After approximately 70 seconds, an audible signal will be heard, indicating that you should change to a
stronger TP transmitter. To turn off this signal:
- Turn the radio off
- Press and hold down the TP button and turn the radio on. By pressing the TP button again, you can
turn the TP alarm on or off.
The radio will function normally again after 5 seconds.
· Press the TP again if you want to stop listening to a traffic announcement.
pg. 170 News
file:///K|/ownersdocs/2000/2000_C70CONV/00c70c_10d.htm (13 of 14)12/30/2006 3:40:14 PM
