Obviously, there will be times when you need to shift later than the light would indicate (for example,
when climbing hills or trailer towing). using the light regularly, however, should result in a mileage
improvement of six percent or more, depending on how you normally drive.
Programming instructions for shift indicator
If the current supply to the control unit is cut (battery disconnected), the control unit will have to be re-
programmed as the control unit memory will be erased.
Drive the car in each gear (first gear not necessary) for approximately 8 seconds.
The gear change indicator light will flicker once (0.5 seconds), as each gear is programmed.
Note: Remove the foot completely from the clutch pedal after each gear change when programming the
control unit.
pg. 11 Starting (ignition) switch
Starting (ignition) switch/steering wheel lock
The steering wheel lock might be under tension when the car is parked. Turn the steering wheel slightly
to free the ignition key.
A chime will sound if the starting key is left in the ignition lock and front door on the driver's side is
opened.
