6.2 Selecting the Operating Mode
6.2.1 Independent Mode of Sources A und B
Sources A and B work independently and can be adjusted separately in this operating mode.
After pressing the MODE button [11] the sub-menu for setting the operating mode is accessed
and the following message appears on the display [5]:
MODE
[ OPERATION ]
With the help of the ENTER button [12] the menu point is confirmed and the following
message is displayed:
MODE
OPER: [ ]
The term in the brackets [ ]describes the current operating mode. On pressing cursor
buttons “∧” and “∨” [13] the operating mode INDEPEND is set. The new setting is saved with
the ENTER button [12]. If the former state is to be kept, the ESC button [12] has to be
pressed. In both cases the unit reverts to the starting state.
6.2.2 Tracking Mode of Source B to the Settings of Source A
Source B is controlled via the parameter inputs of source A in this operating mode. Both
sources can be connected in series by connecting the plus socket of one source with the minus
socket of the other source. The result will be a maximum voltage of
± 30 V.
After pressing the MODE button [11] the sub-menu for setting the operating mode is accessed
and the following message appears on the display [5]:
MODE
[ OPERATION ]
With the help of the ENTER button [12] the menu point is confirmed and the following
message is displayed:
MODE
OPER: [ ]
The term in the brackets [ ]describes the current operating mode. On pressing cursor
buttons “
∧” and “∨” [13] the operating mode A-B TRAC is set. The new setting is saved with
the ENTER button [12]. If the former state is to be kept, the ESC button [12] has to be
pressed. In both cases the unit reverts to the starting state.
15
Operating Instructions PN 300
1/99
