Configuration and activation
A31003-M2000-M103-2-76A9, 07/2014
3-15 Alarm and Emergency Call Configuration, Administrator Documentation
SHB_PNG-Konfig.fm
Configuration menu
Furthermore, the handset checks whether the battery is sufficiently charged. If the battery is
not adequately charged, a technical fault is likewise reported. No settings can be made here.
Procedure:
1. Select the Additional Features icon in the main menu.
2. Select Configuration.
3. Enter the five-position service PIN and confirm with OK.
4. Select one of the three operating modes.
5. Select Techn. Warning.
6. Change the values of the following parameters:
7. Confirm with Save.
3.2.1.5 Adjust Sensor
A complete check and adjustment of the alarm sensors is performed in this menu.
When Alarm Mode and PNG Mode are activated, the sensors for the activated alarms are
checked, with the check being started automatically when the mode is activated. No sensor
check is started automatically in Basic Mode by activating the mode.
Procedure:
1. Select the Additional Features icon in the main menu.
2. Select Configuration.
3. Enter the five-position service PIN and confirm with OK.
4. Select one of the three operating modes.
5. Select Adjust Sensor.
Parameters Operating Mode Value Range Standard Value
Activation BM/AM/PNG On/off On
DPS Request Time BM/AM/PNG 0 min ... 120 min 2 min
Out of range time BM/AM/PNG 0 min ... 120 min 2 min
Warning Signal BM/AM/PNG On/off On
Melodies BM/AM/PNG Alarm 1 ... 5 Alarm 1
Volume BM/AM/PNG 1 ... 5 3
Table 3-13 Parameter – Techn. Warning
