Project Quantity Item #
Model Specified: CSI Section 11400
TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302
Website: www.traulsen.com
SECTION
2-2
NOTE: When ordering please specify: Voltage, Hinging, Options and any additional
warranties.
Continued product development may necessitate specification changes without notice.
Part No. TR35775 (revised 6/08)
Construction, Hardware and Insulation
Cabinet exterior front, sides, one-piece louver assembly and doors are constructed
of stainless steel. Cabinet interior and door liners are constructed of stainless steel.
The exterior cabinet sub-top, back and bottom are constructed of heavy gauge
aluminized steel. A set of adjustable 6" high stainless steel legs are included.
Doors are equipped with a gasket protecting metal door pan. A metal door handle
with gasket guard is standard on all units
Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Anti condensate heaters are located behind each door opening.
Both the cabinet and door(s) are insulated with an average of 2" thick high density,
non-CFC, foamed in place polyurethane.
Interior
Standard interior arrangements include two (2) chrome plated wire shelves per door,
mounted on shelf pins. Recommended load limit per shelf should not exceed 225
lbs. Optional tray slides may be purchased in combination with, or in lieu of these.
Both standard and optional interior arrangements are completely installed at the
factory.
Refrigeration System
The self-contained, balanced refrigeration system using R-404A refrigerant features
a hot gas evaporator defrost, thermostatic expansion valve, air-cooled hermetic
compressor, plenum effect blower coil, large, high humidity evaporator coil located
outside the food zone and an electric condensate evaporator. A 9' cord and plug is
provided. Standard operating temperature is 0 to -5°F.
Controller
The easy to use water resistant INTELA-TRAUL
®
microprocessor control system is
supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready.
Optional hardware required to be NDP compliant. Third party software required for
network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius
Temperature Scale Display Capability, and an RS485 data port. In addition it
includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Clean Condenser,
Evaporator Coil and Discharge Line Sensor Failures, and Power Supply
Interruption.
Warranties
Both a one year parts and labor warranty and a five year compressor warranty (self-
contained models only) are provided standard. An optional 2
nd
year extended parts
and labor warranty is also available. In addition the INTELA-TRAUL
®
control is
warranted by a two year parts and labor warranty.
Specifications
NOTES
NOTE: Figures in parentheses reflect metric equivalents.
1= Height as measured without optional stainless steel work top.
2= Height as measured with optional stainless steel work top.
3= For shipping weights and dimensions please refer to spec sheet 13.3.
4= Based on a 90 degree F ambient and -10 degree F evaporator. For information on remote models,
please refer to spec sheet 13-2.
DIMENSIONAL DATA TU044LT TU072LT
Net Capacity cu. ft. 9.8 (277 cu l) 20.0 (566 cu l)
Length Overall in. 44 (111.7 cm) 71
3
⁄
4
(182.2 cm)
Depth - Cabinet Only in. 31
1
⁄
4
(79.4 cm) 31
1
⁄
4
(79.4 cm)
Depth - with Door Open 90
°
58
13
⁄
16
(149.4 cm) 58
13
⁄
16
(149.4 cm)
Depth - Overall in. 34 (86.4 cm) 34 (86.4 cm)
Height - Overall on 6" Legs in.
1
33
7
⁄
10
(85.6 cm) 33
7
⁄
10
(85.6 cm)
Height - Overall on 6" Legs in.
2
34 (86.4 cm) 34 (86.4 cm)
Net Weight-uncrated lbs.
3
390 560
Number of Shelves 2 4
Shelf Area sq. ft. 8.2 (.8 sq. m.) 18.1 (1.7 sq. m.)
ELECTRICAL DATA
Voltage 115/60/1 115/60/1
Full Load Amperes 8.0 8.0
NEMA Plug Type 5-15P 5-15P
REFRIGERATION DATA
Refrigerant R-404A R-404A
BTU/HR - HP
4
1970 (
1
⁄
2 HP
) 1970 (
1
⁄
2 HP
)
Elevation - TU044LT Elevation - TU072LT
Plan - TU072LT
Plan - TU044LT
Section -
All Models
NOTE: An optional stainless steel worktop is required on
full size undercounter models being used to support
equipment weighing in excess of 100 lbs. or producing
heat in excess of 140°F to the top surface.
Equipped With One NEMA 5-15 P Plug
