TL-WR1043ND 300Mbps Wireless N Gigabit Router
Figure 3-8 Quick Setup - Static IP
¾ IP Address - This is the WAN IP address as seen by external users on the Internet
(including your ISP). Your ISP will provide you with the IP address you need to enter
here. Enter the IP address into the field.
¾ Subnet Mask - The Subnet Mask is used for the WAN IP address. Your IPS will provide
you with the subnet mask which is usually 255.255.255.0.
¾ Default Gateway - Your ISP will provide you with the Gateway address which is the ISP
server’s address. Enter the gateway IP address into the box if required.
¾ Primary DNS - Enter the DNS Server IP address into the box if required.
¾ Secondary DNS - If your ISP provides another DNS server, enter it into this field.
c) If the connection type detected is PPPoE, the next screen will appear as shown in Figure
3-9. Configure the following parameters and then click Next to continue.
Figure 3-9 Quick Setup – PPPoE
¾ User Name/Password - Enter the User Name and Password provided by your ISP.
These fields are case-sensitive. If you have difficulty with this process, please contact
your ISP.
¾ Confirm Password - Enter the password again to make sure that the password is
correct.
d) If the connection type detected is L2TP, the next screen will appear as shown in Figure
3-10.Configure the following parameters and then click Next to continue.
-13-
