17
Load Balance Broadband Router
Configuration
3. After a successful login, the Quick Setup screen will pop up as the Figure 5-4
shows. If it does not prompt, you can click the Quick Setup on the left of the main
menu. Then click Next.
Figure 5-4 Quick Setup
4. Select the total number of WAN ports you prefer to use as the Figure 5-5 shows.
Then click Next to load the WAN Port screen.
Figure 5-5 WAN Mode
5. Select the WAN port you want to use as the Figure 5-6 shows, and then click Next
to load the WAN Connection Type screen.
Figure 5-6 WAN Port
6. Select the connection type provided by your ISP (Internet Service Provider) as the
Figure 5-7 shows. Three popular types are provided here. For other connection
types, please refer to the Network
→
WAN.
Figure 5-7 WAN Connection Type
1) If you choose PPPoE, you will see the screen as the Figure 5-8 shows. Enter the
Account Name and Password provided by your ISP.
