Installation and Setup
34 Phaser 6600 Color Printer
User Guide
1. Turn off the printer.
2. Remove the packaging from the Wireless Network Adapter.
3. Follow the installation sheet and install the Wireless Network Adapter on the printer.
Note: When the Wireless Network Adapter is installed, remove it only as needed and after
reading the instructions for removing the Wireless Network Adapter.
4. To enable the Wireless Network Adapter, disconnect the Ethernet cable from the printer.
5. Turn on the printer.
6. In the Admin Menu, configure the Wi-Fi Settings.
See also:
Connecting to a network with a Wi-Fi protected setup on page 36
Connecting to a wireless network using the control panel on page 38
Connecting to a wireless network manually on page 38
Connecting to a wireless network using CentreWare Internet Services on page 39
