
Xerox Nuvera™ 100/120/144 Digital Production System - Customer Expectations Document
- 30 -
Sheet Feed Modules
Item Xerox Nuvera™ 100/120/144 Digital Production System
Sheet Feed Module (SFM)
4 Tray
Large Format
Sheet Feed Module (LFSFM)
2 Tray
Capacity
20 lb bond
(75 gsm)
• Paper Input Capacity: 5800 sheets
--Tray 1: 1,600 sheets
--Tray 2: 3,100 sheets
--Trays 3 & 4: 550 sheets each
• Paper Input Capacity: 3200 sheets
--Trays 1 & 2: 1,600 sheets
Capacity
80gsm,
0.105 mm
• Paper Input Capacity: 5565 sheets
--Tray 1: 1505 sheets
--Tray 2: 3020 sheets
--Trays 3 & 4: 520 sheets each
• Paper Input Capacity: 3030 sheets
--Trays 1 & 2: 1505 sheets
Minimum
Size
• Trays 1 & 2
--Feed Direction: 5.5 inches (140 mm)
--Across Feed Direction: 8.0 inches (203 mm)
• Trays 3 & 4
--Feed Direction: 7.17 inches (182 mm)
--Across Feed Direction: 8.0 inches (203 mm)
• Trays 1 & 2
--Feed Direction: 7.17 inches (182 mm)
--Across Feed Direction: 8.0 inches (203 mm)
Maximum
Size
• Trays 1 & 2
--Feed Direction: 9.0 inches (229 mm)
--Across Feed Direction: 12.6 inches ( 320 mm)
• Trays 3 & 4
-- Feed Direction: 18.5 inches (470 mm)
--Across Feed Direction: 12.6 inches (320 mm)
• Trays 1 & 2
-- Feed Direction: 18.5 inches (470 mm)
--Across Feed Direction: 12.6 inches (320 mm)
Media
Types
• Bond, Bristol, cover, index, offset, recycled, vellum, tabs and Mylar tabs, transparencies, carbonless,
labels, Never-Tear, pre-printed forms
• Booklet envelopes: 9” x 12”, 228mm x 305 mm , Catalog envelopes: 7” x 10”, 178mm x 254mm
Input
Weight
• Uncoated: 16 lb bond to 90 lb cover (56 gsm to 250 gsm)
• Coated: 90gsm to 250gsm
Feeding
System
• Air shuttle • Air shuttle
COMMENTS
• Auto tray switching & Load while run capability are supported. Do not open trays when the “Drawer in Use”
light is lit.
• Statement tabs and A5 tabs are not supported.
• Paper handling reliability of coated papers is reduced below 120 gsm.
• Trays do not feed to empty. When a feeder empty message is displayed,
there could be as much as 80 sheets of stock remaining in the feeder tray
(based on 20lb. bond / 75 gsm). This is to maintain the best possible reliability
in the feeder mechanisms.
• The use of Xerox media as listed in this document is recommended. Because
there is a difference in technology between offset and digital printing, there is
a difference in media properties required for optimum performance with each
technology. Xerox papers and specialty media are digitally optimized (paper
specs - smoothness, formation, electrical properties, etc., for optimal image
quality, toner adhesion and performance, and also precision sheeted - less
contamination, better registration for use in Xerox digital equipment.
• Two feed modules in tandem may be installed on the input side of the printer.
4-Tray SFM