Xerox Nuvera™ 100/120/144 Digital Production System - Customer Expectations Document
- 16 -
Compatible Media List
The media listed on the following pages have been tested and approved for use in the Xerox Nuvera™
DPS (when using a supported Inline DFA Finishing device, please refer to the individual Inline DFA
Finishing Device Solution Planning Guide for a list of supported media types).
The Xerox Nuvera™ Digital Production system images on a wide range of both coated and uncoated
papers. Results may vary depending on the paper used. We are pleased to consult with you to help
you maximize your objectives.
Coated stocks should be used in environmental conditions where the ambient temperature is between
60° and 72°F and the relative humidity is between 20% and 55%. Coated stocks may exhibit issues
such as higher jam rates, smearing, loss of halftone image quality, mottle, light solid areas, and toner
scatter. Optimized printing may not be possible across the entire weight range of coated papers.
Coated stocks under 120gsm may exhibit degraded performance - avoid any images with greater
than 25% toner area coverage and dark images along the lead edge of sheets; also, machine to
machine variation and tolerance stack ups may result in successful performance on one machine
and not another.
Successful printing on pre-printed stocks is dependent upon many factors. Additional information and
performance expectations are provided in the Xerox Nuvera™ DPS Paper Guide.
The Xerox Supplies Group will be available to test particular media in a customer’s application.
For more information about media, please see the Xerox Nuvera™ Digital Production System Paper
Guide available at www.xerox.com.
For information regarding specific substrates use in the Xerox Nuvera™ DPS, please call Xerox
Supplies at (800) 822-2200.
For More Information and Pricing contact your Xerox Supplies Representative, authorized Xerox merchant, or
visit us on the web at www.xerox.com.
