Superlux Markası'nın Ürünleri

223s, 223xs,

234s, 234xs

Section 3 - Rear Panel Operations

3.1 Rear Panel Operations

The mode switches on the back panel of the unit are used to select one of the three modes

of operation in the 234s/234xs and one of two modes of operation in the 223s/223xs. There

could be disastrous consequences if the crossover were improperly setup or the switches were

mistakenly pushed during the regular operation of a sound system. Therefore great care should

be taken when setting these switches. There is a mode diagram on the back panel to help you

understand at a glance how this is done. The following steps should be taken in setting up

your system:

 •Knowtheloudspeakermanufacturer’srequirementsregardingtheamplificationneeds

of your particular speaker system. Follow the manufacturer’s guidelines carefully, as

dbx is not responsible for damage relating to improper setup or implementation of the

234s/234xs or the 223s/223xs.

 •Withoutanyaudioorpowerconnectionsinplace,usethebackpanelswitchesonthe

crossover to set it to the proper mode of operation; either stereo 2-way, stereo 3-way, or

mono 4-way for the 234s/234xs, or stereo 2-way or mono 3-way for the 223s/223xs.

 •Usetheliteraturethatcamewithyourspeakersystemtoproperlysetupthemodeof

operation and crossover frequencies to the manufacturer’s specifications.

 •Thereisoneofthefourpossiblemodebuttoncombinationsforthe234s/234xswhichis

marked “not valid”. Be sure you have not selected this combination as the 234s/234xs

will not operate correctly in this mode.

3.2 dbx 234xs/234s Rear Panels

dbx 234xs Rear Panel

dbx 234s Rear Panel

When you are certain that the proper selections have been made, complete the steps

described below and in the “234s/234xs or 223s/223xs Audio Connections” section on page 9.

Section 3

Rear Panel Operations