Left Hander: Left hander mode control. Set to ON, left hander / Set to OFF, right hander
Touch Function Source: Touch mode under AV1 / AV2 / AV1:AV2. Select AV1:AV2, user can
touch the AV1 or AV 2 block icon to switch AV1 or AV2 source.
4:3 Mode: LCD display ratio always 4:3 and touch icon table is always on.
Number Page Transparency: 0 ~ 100
Control Mode: Single mode / Matrix mode select
Speed Dome protocol: Pelco-P / Pelco-D select. Depeands on
RS485 Port1 Baud Rate: 2400 / 4800 / 9600 select
RS485 Port2 Baud Rate: 2400 / 4800 / 9600 select
Buzzer Control: Warning buzzer on / off select
Pan / Tile Control Mode: Center mode: the cross symbol is always on the middle of screen
and it is the center point.
Finger mode: when the hand touches the LCD in the beginning, that
touch position is the center. The center position is released until
finger left.
Touch Panel Init: Touch screen initial
Password setting: Key lock password. All function key and panel can not operate.
Touch the panel, touch 1/2/1/8(default password) button and touch Enter to unlock.
Touch Panel LCD: OSD-Touch Setting
