VHF
and
75-ohm coaxial cable
a
(Rear of
projection TV)
VHF/UHF
• UHF
EAC-66 U/V mixer
(not supplied)
300-ohm twin lead cable
Cable or antenna
This is the simplest connection. Connection is
made directly from the cable or antenna to
the projection TV.
(Rear of projection TV)
Coaxial cable ^HF/UMF
Cable and antenna
You may find it convenient to use the
following set up if your cable provider does
not feature local channels that you are able to
receive using an antenna.
(Rear of projection TV)
Coaxial cable
(No connection "TO TO CONVERTER
CONVERTER” in this case)
Antenna cable VHF/UHF
Select Cable or ANT mode by pressing ANT
on the remote control.
Connecting a cable box
Some pay cable TV systems use scrambled or
encoded signals that require a cable box* to
view all channels.
Also, set "Cable" to "On" in the Channel Set
Up menu (page 35).
Coaxial cable
(Rear of projection TV)
VHF/UHF
IN OUT
‘Cable box
Cable box and cable
Some pay cable TV systems use scrambled or
encocicd signals requiring a cable box* only for
certain channels (e.g. HBO, SHOWTIME, etc.)
‘Cable box
Scrambled
channels
(Rear of projection TV)
AUX
75-ohm coaxial cable
(not supplied)
TO CONVERTER
(Signal)
VHF/UHF
CATV cable
(unscrambled channels)
For this set up, you can switch between
scrambled channels (through your cable box),
and normal (CATV) channels by pressing
ANT on your remote control.
Notes:
• You may be able to program your Sony
remote control to operate your cable box.
(see "Operating a Cable Box or Satellite
Receiver (SAT)" on page 53)
• During PIP, P&P, CHANNEL INDEX or
Favorite Channel viewing, the AUX input
can only be viewed in the main picture.
