W Troubleshooting

It, .iftor riMding the followini; instructions, you hnvc additional nuostions related to the use of your Sony projection T\', please call one of the following

numbers (linglish only).

Customers in the continental United States contact the Direct Response Center at: 1-800-222-SONY (7669)

Customers in Canada contact the Customer Relations Center at: (416) 499-SONY (7669)

The picture turns off and the

TIMER/STAND BY indicator on the

front panel flashes (self-diagnosis

function)

• The projection TV is equipped with a self-diagnosis function. If there is a problem with your projection TV, the TIMER/STAND BY indicator on the front

panel will flash repeatedly. Counting the number of flashes helps you inform qualified Sony personnel of the projection TV's condition.

• Press POWER on the projection TV to turn it off, then inform qualified Sony personnel or the above Direct Response Center of the number of flashes.

No picture (screen not lit), no

sound

• Make sure the power cord is plugged in,

• Operate with the buttons on both the projection TV and the remote control.

• Check to see If the TV/VIDEO setting Is correct: when watching TV, set to TV, and when watching video tapes, set to VIDEO 1, 2, 3, 4 or 5.

• Try another channel. It could be station trouble.

• Perform AUTO SET UP again using the SET UP button to return to the factory preset condition, (see “To perform AUTO SET UP again” on page 20)

• The Parental Control feature is activated, (see “To deactivate the Parental Control feature" on page 41)

Remote control does not

operate

• Batteries could be weak. Replace the batteries.

• Press TV (FUNCTION) when operating your projection TV.

• Make sure the projection TV's power cord is connected securely to the wall outlet.

• Locate the projection TV at least 3-4 feet away from fluorescent lights.

• Check the S-Link connection, (see “Using the S-Link Function" on page 16)

• Check the polarity of the batteries.

Dark, poor or no picture

(screen lit), good sound

• Adjust “Picture" in the Video menu, (see “Picture Adjustment" on page 30)

• Adjust “Brightness” in the Video menu, (see “Picture Adjustment” on page 30)

• Check antenna/cable connections.

• Perform AUTO SET UP again using the SET UP button to return to the factory preset condition, (see “To perform AUTO SET UP again” on page 20)

• Adjust the convergence again using the FLASFI FOCUS button, (see “Adjusting the Convergence Automatically (FLASFI FOCUS)” on page 20)

Good picture, no sound

• Press MUTING so that “Muting" disappears from the screen, (see “MUTING” on page 21)

• Check the “MTS/SAP" setting in the Audio menu, (see “MTS/SAP” on page 31)

• Make sure “Speaker” is set to “On” in the Audio menu, (see “Speaker” on page 32)

• Perform AUTO SET UP again using the SET UP button to return to the factory preset condition, (see “To perform AUTO SET UP again” on page 20)