Using the yellow Labeled Buttons for PIP Operations

i(+)l ^ JUMP

or @-(9) or 0

and ENTER

(white labeled button)

Press to select the TV channel on which the symbol is

displayed, (for details, see “Watching the TV” on page 21)

Speed Surf

1 Press and hold CH + or - to change the channel number rapidly.

2 Release to display the desired channel.

ANT

(white labeled

button)

Press to change between the VHF/UHF input and the AUX input for the picture on

which the symbol (or “♦”) is displayed.

(audio)

INDEX

Press to alternate sound between the main picture and the window picture. The

symbol “ J' ’’ will appear for a few seconds to indicate which picture’s sound is being

received.

GUIDE

This is useful when you need to copy down information of the main picture.

Press to freeze the desired scene in the main picture. The frozen picture is displayed

in the window picture while viewing the normal picture in the main picture. The

window picture size is automatically changed to 1/4 if it was 1/9 or 1/16.

Press again to resume normal PIP viewing.

SWAP

(under the cover)

Press to switch the audio and video of the main picture and the window picture.

Each time you press SWAP, the picture and sound of the two will be exchanged.

REFER TO THE

ILLUSTRATION OF THE

REMOTE CONTROL ON THE

INSIDE FRONT COVER OF

THIS MANUAL AS YOU

REVIEW THIS CHART

Note:

If one of the pictures received through

PIP is snowy, the entire screen may

become unstable. In this case, erase the

snowy channel, (see "Channel Skip/

Add" on page 35)