Sony Markası'nın Ürünleri

KDL-V26XBR1

KDL-V32XBR1

KDL-V40XBR1

2-599-865-11(1)

Quick Setup Guide

Connecting Your TV

(See reverse side)

Programming

the Remote Control

Running Initial Setup

For further information, see the operating instruction supplied with the TV.

Please retain this guide for your future reference.

Please follow the steps to setup your TV:

zzz

For service and technical assistance, call our Customer Information Service Center (Toll Free):

US residents: 1-800-222-SONY (7669)

Canadian residents: 1-877-899-SONY (7669)

DO NOT RETURN TO THE STORE

zzz

Wide Mode: Selecting appropriate screen mode will increase

enjoyment of your TV viewing.

When watching a Standard Definition source (4:3 aspect

ratio) on this TV, you will see bars on both the left and right

sides of the screen. Press the WIDE button on your remote to

cycle through different screen modes to fill the screen in

various ways. (Wide Zoom enlarges the center, Normal is

how your TV receives the signal, Full stretches horizontally

and Zoom enlarges the image proportionately to fill the

screen.)

When watching a High Definition source (16:9 aspect ratio)

on this TV, you will see screen filled with a image. Press the

WIDE button on your remote to toggle through different

screen modes, especially zooming in to the center of the

screen. (Wide Zoom enlarges the center, Full displays the

image at its original size, Zoom enlarges the image

proportionately to fill the screen.)

When the TV receives a 720p or 1080i formatted signal, the

Normal mode is not available. See Using WIDE Button section

of the manual.

If you feel the images on the screen is stretched, press the WIDE button to select a

different screen mode.

Notes on your new TV

Running Initial Setup

1 Press to turn on the TV.

The Initial Setup screen appears.

2 Press V or v to highlight the on-screen

display language. Then press .

The message “First please connect

cable and/or antenna” appears. This may require 50+ minutes for

completion and “Start auto program now?” appears.

3 Press (Yes) to start Initial Setup.

Initial Setup automatically creates a list of

receivable channels from both VHF/UHF

antenna and cable TV channels if both

sources are connected.

When Initial Setup is complete, the TV

will display the total number of analog channels and the total

number of digital channels found.

4 Press to exit this screen.

To run Auto Program again at a later time

Refer to the manual on “Initial Setup” and “Auto Program” sections.

Best Audio/Video

Performance

Activating CableCARD™ Service

Before you can use CableCARD service,

you need to insert the CableCARD

device (supplied by your cable

provider) and activate the service.

Inserting the CableCARD incorrectly may result

in permanent damage to the card and the TV.

The connection diagrams shown in the reverse

side are recommendations only; other possible

solutions may exist. Connections that include an

AV receiver can often be complex, so check your

AV receiver’s instruction manual for additional details.

See the “Cables Required” chart that appears with the diagram to determine which

cables you’ll need. Depending on the components you plan to connect, you may need to

purchase extra cables.

Connecting Your TV

Programming the Remote Control

The remote control is preset to operate Sony brand video equipment.

Sony Equipment Programmable Code Number

DVR 772

DVD/VCR 601 (Sony Dream System)

SAT/CABLE 801 (Sony Satellite Receiver)

Follow the steps below to program your TV’s remote control to

operate other video equipment.

Find the three-digit code for your equipment from the

“Manufacturer’s Codes” listed on right. If more than one code

number is listed, try entering from the code listed first.

1 Press and hold the , or FUNCTION

button you want to program on the remote control and

press the

button simultaneously.

The selected FUNCTION button (

, or )

will flash.

2 Enter the three-digit manufacturer’s code number

using the 0-9 buttons while the button is lit. If code is

not entered within 10 seconds, you must perform the

step 1 again.

3 Press button.

When programmed correctly, the selected FUNCTION

button will flash twice, and when not, it flashes five

times.

To check if the code works

Aim your TV’s remote control at the equipment, and press

the green

button. If the equipment responds, the

programming is completed. If not, try the next code listed.

If no code is input within the above specified time, or an invalid or incorrect code

number is input, the remote control automatically goes back to the previous setting.

In some cases, you may not be able to program your remote control to operate other

equipment. In such cases, use the equipment’s own remote control.

Removing the batteries or dead batteries may cause the programmed codes to be lost

and revert back to the factory setting. Reprogramming the codes may be necessary.

Manufacturer’s codes

DVD Players

Manufacturer Code

Sony 751

General Electric 755

Hitachi 758

JVC 756

Magnavox 757

Mitsubishi 761

Panasonic 753

Philips 757

Pioneer 752, 778

RCA/PROSCAN 755

Samsung 758

Toshiba 754

Zenith 760

DVD Changers

Manufacturer Code

Sony 765

Panasonic 766

DVD/VCR Combo Units

Manufacturer Code

Sony 767

Broksonic 776

JVC 775

Panasonic 777

Samsung 774

Toshiba 773

Zenith 768

HDD/DVD Combo Units

Manufacturer Code

Sony 772, 771, 770

5.1ch DVD AV System

Manufacturer Code

Sony (DAV) 601, 602, 603, 604

AV Receivers

Manufacturer Code

Sony 764

VCRs

Manufacturer Code

Sony 301, 302, 303

Admiral (M. Ward) 327

Aiwa* 338, 344

Audio Dynamic 314, 337

Manufacturer Code

Broksonic 319, 317

Canon 309, 308

Citizen 332

Craig 302, 332

Curtis Mathes 304, 338, 309

Daewoo 341, 312, 309

DBX 314, 336, 337

Dimensia 304

Emerson 319, 320, 316, 317,

318, 341

Fisher 330, 335

Funai 338

General Electric 329, 304, 309

Go Video 322, 339, 340

Goldstar 332

Hitachi 306, 304, 305, 338

Instant Replay 309, 308

JC Penney 309, 305, 304, 330,

314, 336, 337

JVC 314, 336, 337, 345,

346, 347

Kenwood 314, 336, 332, 337

LG 332

LXI (SEARS) 332, 305, 330, 335,

338

Magnavox 308, 309, 310

Marantz 314, 336, 337

Marta 332

Memorex 309, 335

Minolta 305, 304

Mitsubishi/MGA 323, 324, 325, 326

Multitech 325, 338, 321

NEC 314, 336, 337

Olympic 309, 308

Optimus 327

Orion 317

Panasonic 308, 309, 306, 307

Pentax 305, 304

Philco 308, 309

Philips 308, 309, 310

Pioneer 308

Quasar 308, 309, 306

RCA/PROSCAN 304, 305, 308, 309,

311, 312, 313, 310,

329

Realistic 309, 330, 328, 335,

324, 338

Sansui 314

Samsung 322, 313, 321

Sanyo 330, 335

Scott 312, 313, 321, 335,

323, 324, 325, 326

Sharp 327, 328

Signature 2000 (M.Ward)

338, 327

SV 2000 338

Manufacturer Code

Sylvania 308, 309, 338, 310

Symphonic 338

Tashiro 332

Tatung 314, 336, 337

Teac 314, 336, 338, 337

Technics 309, 308

Toshiba 312, 311

Wards 327, 328, 335, 331,

332

Yamaha 314, 330, 336, 337

Zenith 331

Cable Boxes

Manufacturer Code

Sony 230

Hamlin/Regal 222, 223, 224, 225,

226

Jerrold/ 201, 202, 203, 204,

General Inst./ 205, 206, 207, 208,

Motorola 218, 222

Oak 227, 228, 229

Panasonic 219, 220, 221

Pioneer 211, 214, 215

Scientific Atlanta 209, 210, 211

Tocom 216, 217

Zenith 212, 213

Satellite Receivers

Manufacturer Code

Sony 801

Dish Network 810

Echostar 810

General Electric 802

Hitachi 805

Hughes 804

Mitsubishi 809

Panasonic 803

Philips 811

RCA/PROSCAN 802, 808

Toshiba 806, 807

Samsung 812

* If an Aiwa VCR does not

work even though you enter

the code for Aiwa, enter the

code for Sony instead.

Making Audio/Video Connections

Your new TV includes various types of video inputs and two types

of audio jacks; composite-RCA type and digital audio (optical).

Use the outputs/inputs that are available on your components that

provide the best video/audio performances:

Connector type

HDMI

(High-Definition Multimedia

Interface)

DVI (Digital Visual Interface)

Will require an adapter to connect to this TV.

Component video

S VIDEO

Composite video

RF/Coaxial

Review the following chart to determine which diagram to use to connect the components in your system:

Turn off and unplug all components before making connections.

Connector type

Digital Optical

Digital Coaxial

Will require an adapter

to connect to this TV’s

digital audio input.

Analog Audio

Sony

Dream System

HD DVR

Player

DVD

Player

DVD

Player

DVD

Player

DVD

Player

DVD

CableCARD

(optional)

VCR

Cable Box

Satellite Receiver

AV Receiver

HD Cable Box

HD Sat Receiver

Digital Recorder

Sony

Dream System

AV Receiver

Cable Box

HD Cable Box

Satellite Receiver

Digital Recorder

Player

DVD

VCR

CableCARD

AUDIO RGB

PC IN 7

ENT

TV/VIDEO

MUTING

DVD/

VCR

SAT/

CABLE

DVR

POWER

TV POWER

JUMP ANT MTS/SAP

FREEZE

SOUND PICTURE

TV/SAT

SUR

WIDE

VISUAL SEARCH

VOL

REC

REC PAUSE

REC STOP

TOP MENU

REPLAY

ADVANCE

PLAY

PAU S E

STOP

OPTICAL

OUT