Intercom/Locator
38
2 Wait for the paged party to answer.
L If paged party does not answer, press {x}
to return to the outside call.
3 Proceed with the desired operation.
■ To transfer the call:
Place the corded handset on the cradle.
L The outside call is being routed to the
handset.
■ To establish a conference call:
Press {3}.
L To leave the conference, place the corded
handset on the cradle. The other parties
can continue the conversation.
L To put the outside call on hold, press
{a}. To resume the conference, press
{3}.
1 During an outside call, press 4 to put the
call on hold.
L k flashes to indicate the outside call is on
hold.
2 To page the base unit, press {0}.
To page another handset, enter its extension
number.
3 Wait for the paged party to answer.
L If the paged party does not answer, press
4 to return to the outside call.
4 Proceed with the desired operation.
■ To transfer the call:
Press {ih}.
L The outside call is routed to the
destination unit.
■ To establish a conference call:
Press {3}.
L To leave the conference, press {ih }.
The other parties can continue the
conversation.
Transferring a call without speaking to the
other handset or base unit user
1 Proceed with the desired operation.
■ When 1 handset is registered:
During an outside call, press {x}.
■ When 2 or more handsets are registered:
During an outside call, press {x}.
– To page a specific handset, enter the
handset number.
– To page all handsets, press {0} or wait for
a few seconds.
L k flashes to indicate the outside call is on
hold.
2 Place the corded handset on the cradle.
L The outside call rings at the other unit.
1 During an outside call, press 4 to put the
call on hold.
L k flashes to indicate the outside call is on
hold.
2 To page the base unit, press {0}.
To page another handset, enter its extension
number.
3 {ih}
L The outside call rings at the other unit.
Note for base unit and handset:
L If the other user does not answer the call within
1 minute, the call rings at your unit again.
Answering a transferred call
Lift the corded handset or press {s} to answer the
page.
Press {C} to answer the page.
Note for base unit and handset:
L After the paging party disconnects, you can talk
to the outside caller.
Y Handset
= Base unit
Y Handset
= Base unit
Y Handset
TG6451_6461FX(e-e).book Page 38 Monday, May 4, 2009 8:55 AM
