29
Initial Setup
Enable Licenses and Options
The online licensing process, managed by the Mitel Application
Management Centre (AMC) allows Solution Providers who have accounts
on the AMC to manage software licenses online. Each company is able to
supply customers instantly if new licenses or options are required.
To enable or upgrade licenses and options, you must connect to the AMC
using either the MCD Software Installer Tool or the 3300 ICP System
Administration Tool. Connecting to the AMC Server requires specific
settings for the Software Installer Tool and the System Administration
Tool. Refer to "MCD Software Installer Tool Requirements for AMC" on
page 30 and "3300 ICP System Requirements for AMC" on page 30.
If you want to be able to transfer licenses and options between controllers,
do not choose to view the Mitel Options Password (MOP) in the AMC.
Once you view the MOP, the licenses and options are “locked-in” to the
controller (they are non-transferrable).
After completing changes to an account on the AMC, you can perform an
automatic sync (recommended) with the AMC, which requires only that
you enter the Application Record ID. If you have chosen to lock-in the
licenses and options to the controller, you can perform an automatic sync,
or you can manually enter the licenses and options in the controller.
Manual entry requires that you enter the MOP.
To enable licenses and options on the controller, you only need to
complete one of the following procedures:
• “Automatic Sync with AMC via MCD Software Installer Tool (Rel 6.0 or
later)” on page 31.
• “Automatic Sync via System Administration Tool” on page 33.
• “Manual License and Options Entry via MCD Software Installer Tool”
on page 33.
• “Manual License and Options Entry via System Administration Tool”
on page 34.
Tip: It is recommended that you perform an automatic sync.
