Extending the cooling down
time
The Cooling down phase which takes
place at the end of a programme can
be lengthend if required. This makes
the garments easier to handle.
The function for extending the Cooling
down phase
–
is deactivated when the machine is
delivered. It can be activated if
wished.
–
is only programmable on the
Cottons
and
Minimum iron
programmes.
Follow steps A to G to programme and
store in memory.
Before you begin, first ensure that
:
– The tumble dryer is switched off.
– The door is closed.
A Press the
Start/Stop
button and keep
it pressed in whilst carrying out steps
B-C.
B Press the
I-On/0-Off
button in.
C Wait until the
Start/Stop
indicator light
comes on . . .
D . . . and then release the
Start/Stop
button.
E Press the
Buzzer
button four times.
–
The
Buzzer
indicator light will briefly
flash on and off seven times.
–
P and 0 will flash alternately in the
display
(factory default setting).
F Press the
Start/Stop
button
repeatedly until
– P and 1 appear in the display (the
Drying
indicator light will also flash
on and off once):
Cooling down phase -
5 minutes longer
–
P and 2 appear in the display (the
Drying
indicator light will also flash
on and off twice):
Cooling down phase -
10 minutes longer
–
P and 0 appear in the display:
Cooling down phase - normal
(factory default setting)
G Switch the machine off with the
I-On/0-Off
button.
The setting you have selected is now
stored in memory. To change the setting
repeat steps A to G.
Programmable functions
51
