2 Function
2.1 Spin lock
Prior to the first commissioning, a lock is placed on the spin cycle.
This is to prevent that the appliance is damaged or people are endangered, if for
example the spin cycle is accidentally activated while the appliance is on display,
with the struts mounted, or with an accessories kit stored in the drum.
The spin lock is in effect until the first water intake of 35 mm wc.
x
Note
The spin lock is also in effect for the customer ser vice mode.
2.2 Toothed V-belt
The toothed V-belt is elastic.
The toothed V-belt tension is the result of the fixed, non-adjustable distance
between the motor and the flywheel.
2.3 Motor overheating protection
The motor winding has a temperature limiter (Klixon) built in.
At increased winding temperature, the temperature limiter opens the switching
contact.
When the switching contact is open, the power electronic (ELP) switches the
motor off.
When the temperature drops to a normal level, the contact closes again.
Descriptive Technical Documentation
DTD no. 11-4800 060-3
22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
