Rinse aid
You can adjust the rinse aid dosage for
best results. The rinse aid dosage can
be set from approx. 0-6 ml. The factory
default setting is 3 ml.
If spots appear on crockery and
glassware:
–
Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
–
Decrease the rinse aid dosage.
^
Select the rinse aid dosage you want,
and confirm your selection with the
middle button.
Buzzer
When the buzzer is activated, an
audible tone sounds at the end of a
programme and when there is a fault.
Buzzer at the end of a programme
You will hear the buzzer at the end of a
programme. It will sound four times in
intervals with a noticeable pause in
between. Switching the dishwasher off
will switch the buzzer off.
Buzzer when there is a fault
In the event of a fault, the buzzer will
sound four times in intervals with only a
very short pause in between.
The buzzer which sounds when there
is fault cannot be deactivated.
Setting the buzzer volume
There are seven different volume
settings. If no volume is selected, the
buzzer is deactivated.
^
Select the volume you want, and
confirm your selection with the
middle button.
Settings menu
71
