3
5. Install last spring clip on the breather hose. Place gasket on S&S®
backplate as shown in Picture 9, and install on the motorcycle
with three slotted screws. Be sure to use blue threadlock. Once the
backplate is installed, connect the breather hose to the breather
tube on backplate with spring clip.
6. Install air cleaner then cover. Use three Phillips head screws
applying blue threadlock to all.
7. Apply the label containing the CARB EO number to the front frame
down tube in a location above or below the factory label. See
Picture 13.
Picture 8
Picture 10
Picture 11
Picture 12
Picture 13
CARB label here
Picture 9
