HOW TO USE THE WASHER
OPTION
CHILD LOCK
DOOR LOCKED
16
• Use this option for loads that need pretreatment.
Adds 16 minutes prewash and drain.
1. Prewash
• Lights whenever the door of the washer is locked.
• The door can be unlocked by pressing the
Start/Pause button to stop the washer.
NOTE: If the water temperature or the level is too
high, the door cannot be unlocked.
Do not try to force the door open when
DOOR LOCKED lights on.
STATUS INDICATOR
• These lights show which portion of the cycle the
washer is operating.
EST. TIME REMAINING
• This display shows:
a) the estimated time remaining in the cycle when
operating,
b) the error code when an error has been
detected.
• Use this option to prevent unwanted use of the
washer. Press and hold PRE WASH button for 3
seconds to lock/unlock control.
• When Child lock is set, CHILD LOCK lights and all
buttons are disabled except the Power button.
You can lock the washer while it is operating.
• Adds time to the wash and rinse for better stain
removal.
• Automatically provides a rinse.
4. Stain cycle
• This option provides an additional rinse.
• Use this option to ensure the removal of detergent
or bleach residue from garments.
3. Extra Rinse
• Use this option to rinse and then spin.
2. Rinse+Spin
• Adds extra water to the wash and rinse cycles for
superior results.
5. Water Plus
• SPINSENSE
TM
can be used when there is a vibration
problem, especially on wood floor installations.
• To operate SPINSENSE
TM
press and hold the Stain
Cycle button for 3 seconds when the washing machine
is running on any cycle.
• When SPINSENSE
TM
has been selected, the Spin
Speed button light will blink on and off continually to
indicate that the SPINSENSE
TM
function has been
selected.
• Push and hold the Stain Cycle button again for 3
seconds to cancel SPINSENSE
TM
.
• Once SPINSENSE
TM
has been selected, if will continue
to function even if interrupted by a power failure.
6. SPINSENSE
TM
