19
ow to use washer
H
Child lock
If you choose to lock the buttons on the
control assembly to prevent tampering, this
function may be selected.
• Child lock can be set by pressing and holding the
Option and Rinse button simultaneously.
(About three seconds)
•
When child lock is set, all buttons are inoperable
except for power button.
• To deactivate Child lock system, press and hold the
Option and Rinse button simultaneously again.
(About three seconds)
• To change to the desired program, whilst in child
lock mode.
1. Press and hold both Option and Rinse button
together once again.
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
• The child lock can be set at any time and it is
automatically canceled when operational errors
occur.
1. Child lock
1. Normal
2. Rinse
+
& Rinse
++
3. Rinse Hold
Rinse
• By pressing the Rinse
button, the Rinse type can
be selected.
- Normal
- Rinse
+
- Rinse
++
- Normal+Hold
- Rinse
+
+Hold
• Cotton, Cotton-Eco, Synthetic performs 3
Rinses
• Delicate, Wool/Silk, Hand Wash, Quick 30,
Duvet performs 2 Rinses
• Used to additional rinse, which may assist
in removing traces of detergent residue.
• By selecting Rinse
+
or Rinse
++
function,
the Rinse Time and the Rinse water are
increased.
• Is selected by pressing the Rinse button
repeatedly this function leaves clothes in the
washer; suspended in the water after a rinse
without entering into spin.
• To proceed to a Drain or Spin function after
a Rinse hold, select Drain on the program
dial or press the Spin selector button to the
desired speed, then press the Start/Pause
button.
The required lamp will light up for
identification.
