24
ow to use washer
H
• If the machine encounters a fault
during operation, the associated fault
will be displayed.
“ ” : Water pressure sensing error
“ ” : Problem of overfilling water
“ ” : Door is not closed
“ ” : Water inlet trouble
“ ” : Drainage trouble
“ ” : Unbalanced load
“ ” : Water temperature trouble
“ ” : Over load in motor
“ ” : Over load in motor
“ ” : The washer experienced a
power failure.
“ ” : Dry heater or thermostat
trouble.
If these error letters are displayed, please
refer to the troubleshooting page29 and
follow the guide.
Display
• When child lock is selected, the
“ ” is displayed.
• After the end of dry, “ ” is displayed.
• When time delay is selected, it shows the
remaining time to finish the selected
program.
• When washing cycle is completed,
“ ” is displayed.
• During washing cycle, the remaining
washing time is displayed.
• Recommended program by
manufacturer.
- Cotton 95˚C :
around 2 hours and 17 minutes
- Cotton 60˚C :
around 1 hour and 40 minutes
- Synthetic :
around 1 hour and 20 minutes
- Delicate : around 52 minutes
- Wool/Silk : around 50 minutes
- Hand Wash :
around 44 minutes
- Quick 30 : around 30 minutes
- Rinse+ Spin : around 18 minutes
- Drain : around 1 minute
• The washing time may vary by the
amount of laundry, water pressure,
water temperature and other washing
conditions.
• If an unbalanced load is detected or if
the suds removing program operates,
the wash time may be extended.
(Max. increasing time is 45 minutes.)
1. Special function display
3. Completion of washing
4. Time left
2. Self diagnosis display
