26
ow to use washer
H
• If the washer encounters a fault during
operation, the associated fault will be
displayed.
“ ” : Water pressure sensing error
“ ” : Problem of overfilling water
“ ” : Door is not closed
“ ” : Over load in motor
“ ” : Water inlet trouble
“ ” : Drainage trouble
“ ” : Unbalanced load
“ ” : Water temperature trouble
“ ” : The washer experienced a power
failure.
“ ” : Dry heater or thermostat trouble.
If these error letters are displayed, please refer to
the troubleshooting page31 and follow the guide.
• When Child lock is selected, the “ ” is
displayed
• After the end of dry, “ ” is displayed.
• When time delay is selected, it shows the
remaining time before the finish of the
selected program.
• When washing cycle is completed,
“ ” is displayed on the “Multi display”.
• During washing cycle, the remaining
washing time is displayed.
• Recommended program by manufacturer.
- Refresh : around 25 minutes
- Allergy Care :
around 2 hours and 19 minutes
- Baby Care :
around 2 hours and 56 minutes
- Cotton : around 2 hours and 20 minutes
- Synthetic :
around 1 hour and 31 minutes
- Cotton Quick :
around 1 hour and 18 minutes
- Wash+Dry(7kg/7kg) :
around 3 hours and 50 minutes
- Hand Wash/Wool :
around 1 hour and 04 minutes
- Quick30 : around 30 minutes
• The washing time may vary by the amount
of laundry, water pressure, water
temperature and other washing conditions.
• If an unbalanced load is detected or if the
suds removing program operates, the wash
time may be extended.
(Max. increasing time is 45 minutes.)
Display
1. Special function display
3. Completion of washing
4. Time left
2. Self diagnose display
