18
EN
Installing the Drain Hose
• The drain hose should not be placed higher
than 100 cm above the floor. Water in the
appliance may not drain or may drain slowly.
1
Insert the band clamp onto the drain hose
elbow.
Band clamp
2
With the hose leading up from the elbow,
insert the elbow onto the drain outlet on the
back of Mini Washer.
3
Adjust the band clamp with pliers to keep
the hose securely in place and prevent
leaking.
Band clamp
Using the Drain Hose Connector
1
Connect the drain hose of Main Washer
and Mini Washer to the drain connector.
2
Attach each drain hose to the double drain
hose connector and tie them with the band
clamps.
3
Insert the drain hose connector into the
drain pipe/hole.
Drain hose
connector
CAUTION
• Make sure the drain hose is not kinked or
pinched. This is a potential cause of drainage
problems or noise.
NOTE
• Depending on the installation environment,
you may have to purchase a separate drain
hose connector.
