32
EN
Step 3. When the Drain Pump is Frozen
• , icon may blink on the display when
drain pump problems occur, take the following
measures.
1
Pour 15 ℓ warm water below 50–60 °C in the
drum until washing machine wing nuts are
immersed and wait for an hour.
2
Press the Power button and then run the
Baby Care programme for an hour.
• When
icon appears on the display,
repeat steps 1 to 2.
3
Turn off the power when the Baby Care
programme is finished. If the drawer is
open, press the Rinse+Spin button for three
seconds and press the Start/Pause button
to run the Spin Only.
4
Select the Rinse+Spin programme and
press the Start/Pause button to check that
the washing machine works.
5
When icon appears on the display,
thaw out the drain hose inner part with the
hot water.
