13
EN
Stacking Mini Washer
Stacking holder
Brackets (front)
Brackets (back)
Brackets (front) Brackets (back) Stacking holder
NOTE
• The error message appears on the
display, if the stacking holder is not attached
to the bottom of the Main Washer.
1
Tilt and hold Main Washer.
2
Assemble the bracket (front) and stacking
holder at the bottom of Main Washer.
• First assemble the stacking holder using 2
type A screws included in the accessory
box, then each bracket using 7 type A
screws included in the accessory box.
2
3
1
3
Pull and save the foam block for future use.
If Mini Washer must be moved in the future,
the foam block will help prevent damage to
Mini Washer during transportation.
NOTE
• To prevent damage, do not remove the
foam block until Mini Washer is at the final
location.
