8
Installation
■ Removing packing
■ Removing transit bolts
To prevent internal damage during transport, the 4 special bolts are locked. Before operating the washer, remove
the bolts along with the rubber bungs.
If they are not removed, it may cause heavy vibration, noise and malfunction
•
Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
There is a risk of suffocation ! Keep all packaging well away from children.
• Keep the spanner provided for future use.
WARNING
NOTE
• Keep the transit bolts for future use.
NOTE
1.
Remove the cardboard box and styrofoam
packing.
2.
Lift the washing machine and remove the base
packing. This will require 2 or more people or
a lifting device.
3.Remove the tape securing the power supply
cord and drain hose.
4.Remove the inlet hoses from the drum.
1.
Unscrew the 4 bolts with the spanner supplied.
2.Take out the 4 bolts along with the rubber
bungs by slightly twisting the bung.
3.Close the holes with the caps supplied.
Washer
Base Packing
Spanner
Transit bolt
