ENGLISH
C 5 Hold the shaver head side down above the
shaver holder.
C 6 Place the shaver into the holder (1), push
shaver back (2) and press down the top
cap to connect the shaver (3) (click).
The shaver will only fit in the SmartClean System
in one direction.
7 The battery symbol slowly blinks to
indicate shaver is charging.
8 Press the ON/OFF button on the
SmartClean System to start the cleaning
cycle.
C 9 The cleaning symbol will light up
continuously.
◗ The cleaning cycle takes approximately 10
minutes. The progress bar shows the progress
of the cleaning cycle.
C ◗ During the drying phase, the drying symbol
lights up continuously.
◗ The drying phase takes approximately 4 hours.
The progress bar shows the progress of the
drying cycle.
◗ Do not press the ON/OFF button while the
cleaning cycle is running. If this does occur, the
cleaning cycle will stop and the cleaning or
28
±4 hrs.
3
1
2
14_S9721.indd 28 12/15/14 3:32 PM
