Problem Possible cause Solution
An exclamation
mark, replacement
reminder and the
cleaning reminder
have suddenly
appeared on the
display.
The shaving heads
are soiled or
damaged.
Replace (see chapter
‘Replacement’) or clean
the shaving heads (see
chapter ‘Cleaning and
maintenance’).
Water is leaking
from the bottom
of the shaver.
During cleaning,
water may collect
between the inner
body and the outer
shell of the shaver.
This is normal and not
dangerous because all
electronics are enclosed in
a sealed power unit inside
the shaver.
S9712/33,
S9711/33,
S9522/26,
S9521/26,
S9152/26,
S9151/26 only: The
SmartClean system
does not work
when I press the
on/off button.
The SmartClean
system is not
connected to the
mains.
Put the small plug in
SmartClean system and
put the adapter in the wall
socket.
S9712/33,
S9711/33,
S9522/26,
S9521/26,
S9152/26,
S9151/26 only:
The shaver is not
entirely clean
after I clean it in
the SmartClean
system.
You have not
placed the shaver in
the SmartClean
system properly, so
there is no electrical
connection
between the
SmartClean system
and the shaver.
Press down the top cap
(‘click’) to ensure a proper
connection between the
shaver and the SmartClean
system.
ENGLISH
65
